Arduino with DHT11 - Prints temperature and humidity to LCD and serial monitor

Code gets:

- Temperature and Humidity from a DHT11 sensor

Prints the data to the Serial Monitor

Data is printed onto a LCD display

Please let me know if you experience any problems with this code. Be sure to check back for more Arduino code.

Schematic:

Code:

 /*  
   
 Oliver Holden  
 Created 28/10/2014  
   
 Components:  
 * Arduino UNO  
 * DHT11  
 * 4.7K resistor  
 * LCD  
   
 - Gets Temperature and Humidity from a DHT11 sensor  
   
 Prints the data to the Serial Monitor  
   
 Data is printed onto a LCD display  
   
 Schematic for this project is on  
 http://breadboarder.blogspot.co.uk/  
   
 */  
   
 #include <LiquidCrystal.h>   // Including Libaries needed  
 #include <dht.h>  
   
 dht DHT;   // Need this  
   
 LiquidCrystal lcd(8, 9, 4, 5, 6, 7);   // select the pins used on the LCD panel  
   
 int dht_dpin = A0;   // DHT11 Data pin attached to A0   
   
 void setup(){  
   
  Serial.begin(9600);   // Opening serial connection at 9600bps  
  lcd.begin(16, 2);   // Starting LCD libary and setting character size of LCD (X, Y)  
  lcd.setCursor(0,0);   // Setting starting position of text  
    
 }  
    
 void loop(){  
   
 DHT.read11(dht_dpin);   // Reading Data from DHT11  
 delay(2000);   // 2s delay beween reading DHT11  
   
   
 {  
    
  // Printing data to LCD   
    
  lcd.setCursor(0,0);      // move cursor to first line 0 and 9 spaces over  
  lcd.print("Temp = ");   
  lcd.print(DHT.temperature);  
  lcd.print(" C");  
    
  lcd.setCursor(0,1);      // move cursor to second line 1 and 9 spaces over  
  lcd.print("Hum = ");        
  lcd.print(DHT.humidity);  
  lcd.print(" % ");  
   
  }  
    
  // Printing data to Serial Monitor  
  lcd.print("Temp = ");   
  lcd.print(DHT.temperature);  
  lcd.print(" C");  
  lcd.print(",");  
    
  lcd.print("Hum = ");        
  lcd.print(DHT.humidity);  
  lcd.print(" % ");  
    
 }